Interrupt v3: Add interrupt traits and a KVM based implementation

Cargo.toml

@@ -6,3 +6,4 @@ repository = "https://github.com/rust-vmm/vm-device"
 license = "Apache-2.0"
 
 [dependencies]
+vmm-sys-util = "~0"

src/interrupt/mod.rs

@@ -0,0 +1,123 @@
+// Copyright (C) 2019-2020 Alibaba Cloud. All rights reserved.
+// SPDX-License-Identifier: Apache-2.0
+
+//! Traits and Structs to manage interrupt sources for devices.
+//!
+//! In system programming, an interrupt is a signal to the processor emitted by hardware or
+//! software indicating an event that needs immediate attention. An interrupt alerts the processor
+//! to a high-priority condition requiring the interruption of the current code the processor is
+//! executing. The processor responds by suspending its current activities, saving its state, and
+//! executing a function called an interrupt handler (or an interrupt service routine, ISR) to deal
+//! with the event. This interruption is temporary, and, after the interrupt handler finishes,
+//! unless handling the interrupt has emitted a fatal error, the processor resumes normal
+//! activities.
+//!
+//! Hardware interrupts are used by devices to communicate that they require attention from the
+//! operating system, or a bare-metal program running on the CPU if there are no OSes. The act of
+//! initiating a hardware interrupt is referred to as an interrupt request (IRQ). Different devices
+//! are usually associated with different interrupts using a unique value associated with each
+//! interrupt. This makes it possible to know which hardware device caused which interrupts.
+//! These interrupt values are often called IRQ lines, or just interrupt lines.
+//!
+//! Nowadays, IRQ lines is not the only mechanism to deliver device interrupts to processors.
+//! MSI [(Message Signaled Interrupt)](https://en.wikipedia.org/wiki/Message_Signaled_Interrupts)
+//! is another commonly used alternative in-band method of signaling an interrupt, using special
+//! in-band messages to replace traditional out-of-band assertion of dedicated interrupt lines.
+//! While more complex to implement in a device, message signaled interrupts have some significant
+//! advantages over pin-based out-of-band interrupt signaling. Message signaled interrupts are
+//! supported in PCI bus since its version 2.2, and in later available PCI Express bus. Some non-PCI
+//! architectures also use message signaled interrupts.
+//!
+//! While IRQ is a term commonly used by Operating Systems when dealing with hardware
+//! interrupts, the IRQ numbers managed by OSes are independent of the ones managed by VMM.
+//! For simplicity sake, the term `Interrupt Source` is used instead of IRQ to represent both pin-based
+//! interrupts and MSI interrupts.
+//!
+//! A device may support multiple types of interrupts, and each type of interrupt may support one
+//! or multiple interrupt sources. For example, a PCI device may support:
+//! * Legacy Irq: exactly one interrupt source.
+//! * PCI MSI Irq: 1,2,4,8,16,32 interrupt sources.
+//! * PCI MSIx Irq: 2^n(n=0-11) interrupt sources.
+//!
+//! A distinct Interrupt Source Identifier (ISID) will be assigned to each interrupt source.
+//! An ID allocator will be used to allocate and free Interrupt Source Identifiers for devices.
+//! To decouple the vm-device crate from the ID allocator, the vm-device crate doesn't take the
+//! responsibility to allocate/free Interrupt Source IDs but only makes use of assigned IDs.
+
+use vmm_sys_util::eventfd::EventFd;
+
+/// Reuse std::io::Result to simplify interoperability among crates.
+pub type Result<T> = std::io::Result<T>;
+
+/// Data type to store an interrupt source identifier.
+pub type InterruptIndex = u32;
+
+/// Trait to manage a group of interrupt sources for a device.
+///
+/// A device may support several types of interrupts, and each type of interrupt may contain one or
+/// multiple continuous interrupt sources. For example, a PCI device may concurrently support:
+/// * Legacy Irq: exactly one interrupt source.
+/// * PCI MSI Irq: 1,2,4,8,16,32 interrupt sources.
+/// * PCI MSIx Irq: 2^n(n=0-11) interrupt sources.
+///
+/// PCI MSI interrupts of a device may not be configured individually, and must configured as a
+/// whole block. So all interrupts of the same type of a device are abstracted as an
+/// [InterruptSourceGroup](trait.InterruptSourceGroup.html) object, instead of abstracting each
+/// interrupt source as a distinct InterruptSource.
+#[allow(clippy::len_without_is_empty)]
+pub trait InterruptSourceGroup {
+    /// Type of configuration information for interrupt source.
+    type C;
+
+    /// Get number of interrupt sources managed by the group.
+    fn len(&self) -> InterruptIndex;
+
+    /// Get base of the assigned Interrupt Source Identifiers.
+    fn base(&self) -> InterruptIndex;
+
+    /// Enable the interrupt sources in the group to generate interrupts.
+    ///
+    /// The `enable()` should be invoked before invoking other methods to manipulate the
+    /// InterruptSourceGroup object.
+    fn enable(&self, configs: &[Self::C]) -> Result<()>;
+
+    /// Disable the interrupt sources in the group to generate interrupts.
+    fn disable(&self) -> Result<()>;
+
+    /// Update the interrupt source group configuration.
+    ///
+    /// # Arguments
+    /// * index: sub-index into the group.
+    /// * config: configuration data for the interrupt source.
+    fn update(&self, index: InterruptIndex, config: &Self::C) -> Result<()>;
+
+    /// Returns an interrupt notifier from this interrupt.
+    ///
+    /// An interrupt notifier allows for external components and processes
+    /// to inject interrupts into a guest, by writing to the file returned
+    /// by this method.
+    fn notifier(&self, _index: InterruptIndex) -> Option<&EventFd> {
+        None
+    }
+
+    /// Inject an interrupt from this interrupt source into the guest.
+    ///
+    /// If the interrupt has an associated `interrupt_status` register, all bits set in `flag`
+    /// will be atomically ORed into the `interrupt_status` register.
+    fn trigger(&self, index: InterruptIndex) -> Result<()>;
+
+    /// Mask an interrupt from this interrupt source.
+    fn mask(&self, _index: InterruptIndex) -> Result<()> {
+        Err(std::io::Error::from(std::io::ErrorKind::InvalidInput))
+    }
+
+    /// Unmask an interrupt from this interrupt source.
+    fn unmask(&self, _index: InterruptIndex) -> Result<()> {
+        Err(std::io::Error::from(std::io::ErrorKind::InvalidInput))
+    }
+
+    /// Check whether there are pending interrupts.
+    fn get_pending_state(&self, _index: InterruptIndex) -> bool {
+        false
+    }
+}

src/lib.rs

@@ -3,9 +3,12 @@
 
 //! rust-vmm device model.
 
+extern crate vmm_sys_util;
+
 use std::cmp::{Ord, Ordering, PartialOrd};
 
 pub mod device_manager;
+pub mod interrupt;
 pub mod resources;
 
 // IO Size.