In here you will find the files used to build your own qazTop. These files are originally printed with SLA technology, but feel free to experiment with FDM.
- Qaz european retailer -> north american retailer ->
- RaspberryPi 5 (8GB ram)
- 8" (inch) display ->
- Waveshare Uninterruptible Power Supply UPS ->
- Hinges ->
- Internal USB cables -> (same manufacturer also sells the corresponding ribbon cables)
- [OPTIONAL] Micro SD extension cable -> (used to avoid having to open the the bottom hull to acces the memory)
- [OPTIONAL] USB toggle -> (my personal touch to the project, allows me to toggle the qaz and hook it up to another system on the side)
- M2.5x8 (screws to mount display to lid_hull.stl)
- M3x8 Flat Socket Head (screws to mounth both lid_panel.stl and bottom_panel.stl)
- M4.8*12 (screws to securely mount the hinges, screw tightly untill no wobble) I have lost track which screws I used to mount other components in the bottom hull, such as the RaspberryPi, Qaz and the UPS module. When ordering sets of the screws above, you should probably also have the appropriate screws to mount these components. The usb toggle however is just friction fit.
- some rubber stickers for the bottom, do what fits you best
- some glue to securely mount the micro SD drive cable and USB port both on the left side.
