Soldering station hardware and firmware, powered by USB PD, delivering up to 100 W.
Supports irons with thermocouples as temperature probes, for example
- JBC C210
- JBC C245
On the device, either
- hold the
BOOT-button on the PCB and insert the USB cable into the data/debug port, or - go to the user menu (long-press encoder button), scroll down to
DFU mode, and select.
Once in DFU mode, flash a binary from the release artifacts. For example with
dfu-util -a 0 -s 0x08000000:leave -D <firmware_file_name>.bin
