DUT isn't started if QoS config was saved to startup-config

[xivamar]

Problem Description:

DUT isn't started if QoS config was saved to startup-config

OpenSwitch version:

OpenSwitch 0.4.0 (Build: appliance-ops-0.4.0-meraswitch/devel/master-20170329113554-dev)

Test Topology:

Single DUT

Steps to reproduce the problem:

1. Configure DUT as in attached file.

2. Save config via copy running-config startup-config.

3. Stop all devices.

4. Start all devices.

5. Check DUT and config via show running-config - NOK: Error was returned.

   OpenSwitch-1# show running-config 
   System is not ready. Please retry after few seconds..
   OpenSwitch-1# 
   

QoS_config.txt

[alrukav]

Hi, DUTs is not started if radius-server or tacacs-server was configured too:

Configuration:

switch# configure terminal
switch(config)# radius-server host s1 OR tacacs-server host s1
switch(config)# end
switch# copy running-config startup-config

[AKochin]

Validation is not passed in queue.py qos.py and qos_profile.py files. All returns:
"An applied profile cannot be amended or deleted"
open-switch/ops-classifierd